Table of Contents
Advertisement
CRS-311 1:1 Redundancy Switch
Appendix E
Step Task
Connect the loose (unconnected) end of the
5
CA-0000089 Ribbon Cable to the P1 socket on the
CRS-515 TMI.
Install the CRS-515 TMI into its chassis slot. Engage the
6
TMI until it is properly seated in the receptacle on the
chassis' backplane.
Securely hand-tighten the thumbscrews on both the
7
TMI and RMI.
The retrofit has been completed and the CRS‐311 1:1 Redundancy Switch is ready to be connected to the SLM‐5650/5650A modems per
Chapter 3. CABLES and CONNECTIONS, Sect. 3.3 SLM‐5650/5650A Modem Connections.
E–4
Revision 7
MN/CRS311.IOM
Advertisement
Table of Contents
