Table of Contents
Advertisement
CRS-311 1:1 Redundancy Switch
Introduction
•
In Ethernet BPM (Bridge Point‐to‐Multipoint) Mode, the CRS‐311 uses Ethernet "Port
1" for Ethernet Router Mode traffic, while Ethernet "Port 2" through "Port 4" on the
CRS‐311 are used for Ethernet Bridge Mode traffic.
3. For detailed information about cabling the CRS‐311 1:1 Redundancy Switch for multi‐port
Ethernet traffic – as well for single‐port Ethernet traffic (when the SLM‐5650/5650A
modems are equipped with the optional 10/100/1000 Base‐T (GbE) Interface), see Chapter
3. CABLES AND CONNECTIONS.
Figure 1-6. CRS-311 Multi-port Ethernet Using the SLM-5650/5650A
1–10
Revision 7
MN/CRS311.IOM
Advertisement
Table of Contents
