Peripherals - ELCOM Euro-50iTE Mini User Manual

PERIPHERALS

Note:
Prior to programming read as soon as possible the section „General procedure when programming in P-
-mode", which is found at the start of the chapter „Programming the cash register"..
In this menu you can configure the parameters for peripheral attachments such as a bar-code scanner and
an electronic scale.
Table 3.13 – Peripherals - move through the menu using the arrow keys
Menu Abbrev. Name of sub-menu Description of sub-menu
Peripherals
1
2
3
4
Table 3.14 - parameters for programming a scanner
Parameter
Terminative char*
Com. port
* method of editing – use arrow keys
Table 3.15 - parameters for programming the scale
Parameter
Scale type *
Com. port *
Ext. devices
Scanner
Scale
Payment terminal
PC
Default setting Range
Scanner CR LF
Scanner CR LF
Scanner CR
none none, Port 1, Port 2

Default settings
Morcan, MARTES T
none
P-mode
Parameters and communications port for communicating with
a scanner
Parameters and communications port for communicating
with scales
Parameters and communications port for payment terminal
Parameters and communications port for PC
Description
Terminal code for bar-code scanner
Communication port for bar-code scan-
ner

or
Range
Morcan, MARTES T
Euro, MARTES M
Macca K
DIBAL
Motex R
Mettler Toledo
ACOM
CAS Morcan TP2
none, Port 1, Port 2
Programming the cash register
 �
or
Description
Communication protocol for electro-
nic scales
Communication protocol
electronic scale
for an
35