Testing the printer
The printer's self-test will print out the entire set of characters in standard size with the related hexadecimal
code on both the receipt ribbon and the journal ribbon.
Procedure for initiating the printer's self-test:
Sequence of steps
In the P-mode press
menu for the printer test (P-mode – System parameter – Tests):
Confirm by pressing
gister's character set on the thermal ribbon.
After successful completion of the test, the display reads:
Testing the position of thermal printer head
The display will show the current position of the printer head. Movement of the head's lifting mechanism
changes the depiction of the head position on the display according to the actual position of the head's
lifting mechanism.
Procedure for initiating the test:
Sequence of steps
In the P-mode, press
menu for testing the position of the thermal printer head (P-mode –
System parameter – Tests):
Confirm by pressing
display will show:
If the printer head is lifted, the display will show:
Complete the test by pressing
Paper sensor test
The display will show the current state of paper ribbons present in the sensors. Installing and removing
paper from the sensors changes the status depicted on the display, depending on the presence of the
paper in the sensor.
Procedure for starting the test:
Sequence of steps
In the P-mode press
menu for testing the paper ribbon sensor (P-mode – System params
– Tests):
Confirm by pressing
inserted in the printer, this will appear on the display:
�
or
and press
TOTAL . The printer will print out the cash re-
�
or
and press
TOTAL . If the printer head is in place, the
TOTAL .
�
or
and then
TOTAL. If the thermal ribbon is correctly
TOTAL to enter the
TOTAL to enter the
TOTAL to enter the
Helpful advice
Display
Tests
Printer
Printer
working...
Test OK
Display
Tests
Head position
Head OK
Head raised
Test OK
Display
Tests
Paper sensor
Receipt
OK
81
Need help?
Do you have a question about the Euro-50iTE Mini and is the answer not in the manual?