Hand/Auto Disable - Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual

Control

5.3 Hand/Auto disable

5.3 Hand/Auto disable
Overview
The Hand/Auto disable function disables the HAND/AUTO key on the Intelligent Operator
Panel (IOP) and pressing the key will not produce any action by the IOP.
An example of setting up the Startup in Hand mode is given in the instructions below.
Setting up the Hand/Auto disable function
1. Select the "Control".
2. Select "Hand/Auto Disable".
3. Enter the password (default password is: 00000000).
54
If the incorrect password is entered, the IOP will return to
the "Control Menu".
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
Intelligent Operator Panel (IOP)