Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual page 79

Drive identity
This option allows the user to display the technical details of
the components that comprise the Inverter system. This
includes the details of the Control Unit and Power Module.
This is a read-only screen and cannot be modified.
Parameter settings
Drive factory reset
There are two factory reset options:
Factory reset
tory default settings. Any safety parameters that have been
modified will not be reset.
Safety factory reset
ters, including the safety parameters back to the factory
default settings.
Parameter filter
This option allows the user to select the parameter access
level. Expert is the default access level, which gives the
user access to the most frequently used parameters. Expert
level gives access to all available parameters.
Intelligent Operator Panel (IOP)
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
- This option reset all parameters to there fac-
- This option reset all the drive parame-
Menu
6.6 Extras
79