Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual page 66

Menu
6.3 Parameters
Diagnostics
This option allows the user direct access to the parameters
that monitor the state of the system. The are divided into the
following functional groups:
• Control/status words
• Interconnections
• Faults/alarms
All the parameters under these groupings are read-only and
cannot be modified.
Search by number
This option allows the user to search for a specific parameter
number. Should the parameter number not exist, then the
nearest parameter to the entered value is displayed.
Use the Wheel to alter the value of each digit and press the
Wheel to confirm. The next digit will automatically be high-
lighted, rotate the Wheel to change the value and press the
Wheel to confirm. Once all fields have been entered, the IOP
will display the parameter. If a wrong digit is selected, press
Esc to go back one digit.
If the parameter number does not exist, the screen will display
a choice between "Select a new number" or "Go to the near-
est parameter number".
66
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
Intelligent Operator Panel (IOP)