Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual page 63

Figure 6-1
Parameter groups
All parameters
This options allows the user access to the individual
parameters of the Inverter. The default filter is "Standard"
which allows the user access to the most frequently used
parameters. The default filter settings can be changed by
selecting "Parameter filter" from the "Parameter settings"
option in the "Extras Menu".
Commissioning
This screen displays a complete listing of all the parameters
required for quick commissioning. The parameters are listed in
numerical order and can be accessed to either confirm the set
values or modified should there be a need to fine tune the
application or correct any errors in the parameter values.
Commissioning interface
Selects the storage medium for access via the USB mass
storage.
Intelligent Operator Panel (IOP)
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
Parameters - Drive Object Selection
Menu
6.3 Parameters
63