Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual page 86

Menu
6.7 I/O Editor
Editing the inputs and outputs
1. Navigate to the "Extras" menu and select "I/O Editor"
2. Select the input or output you wish to configure.
3. Select the digital input you wish to configure.
4. Select the function to be assigned to digital input 3 (DI3).
5. When the final selections have been made, press ESC
86
In this example, the digital inputs have been selected.
In this example digital input 3 (DI3) has been selected.
In this example p1110.1 "Inhibit negative direction" is
selected.
Note:
If there are more possible settings for a parameter,
another screen will display multiple choices of the
specific settings for the parameter.
twice to return to the I/O Editor screen to configure
another input or output or a long press of ESC to return
to the general status screen.
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
Intelligent Operator Panel (IOP)