Wizards - Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual

Wizards

Overview
The IOP wizards are question-driven macros that assist the user to set-up various functions
and applications of the Inverter.
Safe and stable state of the Inverter
During commissioning of the Inverter it is essential to ensure that the system is in a safe
and stable state, as some commissioning processes have the potential to start the motor.
Therefore it is important to secure any loads and ensure that should the motor start, no
potentially dangerous conditions exist.
Default datasets
The wizards use the default Drive datasets (DDS0 and CDS0), if the default datasets are
changed to the other datasets, the wizards may not function correctly.
Note
Default wizard and downloading
The IOP is delivered with only the Basic Commissioning Wizard installed. If the CU has
safety functions, the Basic Safety Commissioning Wizard will also be available.
All other wizard can be downloaded using the IOP updater tool, see Firmware and language
upgrade (Page 23)
Wizards
There are several wizards (available via download) which allow the user to set-up various
functions and commission the Inverter. An example of the type of wizards are given below:
● Basic commissioning
● Open Loop Compressor
● Fixed Closed Loop Compressor
● Open Loop Fan
● Fixed Closed Loop Fan
● Open Loop Pump
● Fixed Closed Loop Pump
Intelligent Operator Panel (IOP)
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
WARNING
CAUTION
4
25