Table of Contents
Advertisement
Operator elements and displays
5.1 Mobile Panel
5.1.5
Hand wheel
Introduction
The hand wheel is an optional control element at the Mobile Panel 177. The hand wheel can
be turned without a stop and does not have a zero position.
You can use the hand wheel to input incremental values.
The status of the hand wheel is evaluated as a direct button or via WinCC flexible system
functions.
Figure 5-9
①
Operation
To facilitate operation, the hand wheel has a small recess.
5-10
Hand wheel
Hand wheel with recess
Mobile Panel 177 (WinCC flexible)
Operating Instructions (Compact), Edition 07/2005
Advertisement
Table of Contents
