Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual page 88

Menu
6.8 Write Protection
Activating/deactivating write protection
To activate or deactivate the write protection function, the following procedure must be
performed:
1.
2.
3.
4.
5.
88
Select "Menu" from the main screen.
Select "Parameters" from the menu.
Select "Search by number" from the Parameters
menu.
Input "07761" then press "OK".
The screen will automatically display the parameter in
the "All Parameters" menu. The write protection pa-
rameter is highlighted. Note that the current status of
the write protection function is shown below the pa-
rameter name. Press "OK" to select the parameter.
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
Intelligent Operator Panel (IOP)