Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual page 74

Menu
6.6 Extras
2.
3.
4.
5.
6.
74
Select the screen position of the displayed values
Select the parameter values that should be displayed
on the status screen.
Select the required units of measure to be displayed
on the status screen.
Select the required number of decimal places to be
displayed for the choosen units of measure.
On completion of the user selections, a summary of
the settings is displayed.
If the settings are correct, then select "Continue" to
move to the next step.
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
Intelligent Operator Panel (IOP)