Optional Remote Control Settings - BEA LZR-WIDESCAN User Manual

OPTIONAL REMOTE CONTROL SETTINGS

Teach-in
Presettings
Service Mode
Factory Reset
Red Spots
Out 1 Function*
Out 2 Function*
Relay Function*
Always enter 3 digits for the F1-parameter: 1st digit refers to output 1, 2nd to output 2, 3rd to the relay function (see p. 13 for detailed info)
Width
Depth
Object type
Direction
(see next pg for details)
Immunity
Door zone OFF
InvertField
Width
Depth
Object type
Max. presence time
Immunity
Door zone OFF
InvertField
Width
Depth
Max presence
(for objects < 1'6")
Immunity
Uncovered Zone
InvertField
75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112
0 1 2
install
The service mode deactivates the presence and safety detection during 15 minutes and can be useful during an installation, a
mechanical teach-in of the door or maintenance work. Exit the service mode by using the same sequence.
full: complete reset of all values
partial: reset of all values except IN/OUT
Pressing "magic wand" twice activates the 2 laser spots, enabling angle adjustments and sensor positioning.
motion or
no change motion
pull cord
motion or
no change motion
pull cord
motion or
no change motion
pull cord
X X X
000 (min) – 240 (max)
X X X
000 (min) – 287 (max)
uni
bi
100%
1 2
X X X
000 (min) – 287 (max)
no yes By activating the filed inversion, the motion field learned during the walk teach-in will be inverted.
X X X
000 (min) – 240 (max)
X X X
000 (min) – 287 (max)
30 s 1 min
1 2
X X X
000 (min) – 287 (max)
no yes By activating the filed inversion, the motion field learned during the walk teach-in will be inverted.
X X X
000 (min) – 240 (max)
X X X
000 (min) – 287 (max)
30 s 1 min
1 2
2" 4"
no yes By activating the filed inversion, the motion field learned during the walk teach-in will be inverted.
3 4 5
standard corridor corner
presence safety pull cord
presence safety pull cord
presence safety pull cord
factory default: 240
factory default: 287
vehicle: only vehicles are detected (all types)
any: vehicles and pedestrians are detected
3 4
factory default: 000
factory default: 240
factory default: 080
vehicle: only vehicles are detected (all types)
any: vehicles and pedestrians are detected
2 min 5 min 10 min
3 4
factory default: 000
factory default: 240
factory default: 016
2 min 5 min 10 min
Depending on mounting height, angles, and other installation
3 4 factors, some immunities might exclude conformity with EN
6" 8"
FACTORY VALUES
6 7
full
motion
motion + motion +
pull cord
speed height
safety
motion
motion + motion +
pull cord
speed height
safety
motion
motion + motion +
pull cord
speed height
safety
vehicle
uni uni
rev 100%+
vehicle
30 min 60 min 120 min
30 min 60 min 120 min
An object < 6" is not detected.
An object > 6" is detected during10 min (adjustable).
An object > 1'6" is detected infinitely (not adjustable).
8 9
partial
motion
pull cord
presence
motion
pull cord
presence
motion
pull cord
presence
any
uni
any
infinite
infinite
12445.
Page 9 of 15 Page 9 of 15 Page 9 of 15 Page 9 of 15