Mounting & Wiring - BEA LZR-WIDESCAN User Manual

1 MOUNTING & WIRING
Mounting height: as high as possible (max. 19'6").
The size of the detection field depends on the
mounting height.
Mounting position: center of door or left corner.
Mounting on the right side of the door should be
avoided.
1
Verify that the angle lock screw is positioned as indi-
cated. Unscrew slightly if necessary.
3
Position the sensor horizontally as shown and secure
the sensor to the mounting bracket.
5
*
*
COM
NO
NC
*
*output status powered during non-detection with factory values
Connect the wires accordingly.
The output functions can be configured if necessary (see page 9 or 12).
75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112 75.5916.02 LZR-WIDESCAN 20180112
Remove the mounting bracket from the sensor and
secure it to the wall. You can also install the sensor
directly without using the mounting bracket.
Plug in the connector and pass the cable (PN 20.5399)
through the cable passage without making a loop.
POWER
OUTPUT 1
OUTPUT 2
RELAY
TEST
H
2
4
Teach-in reminder
Push OK to return to
detection display.
H
5
INSTALL INSTALL
Page 5 of 15 Page 5 of 15 Page 5 of 15 Page 5 of 15