Mac Address Security Setting - Icom SB-110 Instruction Manual

PDF取説-E_1 02.1.23 10:28 ページ43
5-1 [Wireless LAN settings] Screen (continued from the previous page)

■ MAC Address security setting

q
Mac address
security ...............
w
MAC address.........
e
Additional settings
SETTING SCREEN
Register the MAC address display of SB-110 and the
MAC address of device to be connected by wireless
and restrict the connection.
q
w
e
r
Specify whether only SB-110 with the same MAC address
as one registered in advance or wireless terminal with
such same MAC address can be connected to SB-110 or
not (default setting: no).
* To enable the setting change, click [Set & Reboot].
The MAC address registered in the wireless section of SB-
110 is displayed here. This MAC address is also the MAC
address of SB-110.
* If any address is displayed here, please contact the
shop or our service section.
Enter the MAC address of target SB-110 or wireless ter-
minal in this field.
* A maximum of 256 MAC addresses can be registered.
* A maximum of 12 characters (falf size) can be entered.
* When you have enter the MAC address, click [Add] to
check that the address has been registered in the [Cur-
rent settings] field.
* The following two types of character strings are consid-
ered as the same address.
11-11-11-22-33-33, 1111112233
5
5
43