B Use The Setting Screen - Icom SB-110 Instruction Manual

PDF取説-E_1 02.1.23 10:28 ページ72
6
MAINTENANCE
6-5 Returning Setting to Default State (continued from the previous page)

B Use the setting screen

If you know the IP address set in SB-110 and you can access the setting screen with such
IP address, you can initialize all the settings or a certain part of the settings (e.g., the wire-
less section) through the SB-110 setting screen.
<How to initialize>
1. Start a WWW browser and access the SB-110 setting screen ( see 4-2).
¡The [Wireless LAN Settings] screen is shown.
2. Click [Initialize] in the left frame.
¡The [Initialize] screen is shown.
3. Click a radio button of desired condition.
4. Click [Initialize].
¡Return the setting equivalent to the selected condition to the default state and enter
the [Wireless LAN Settings] screen.
3.
Click
2.
Select
1.
Click
■ Type of Initialization
ALL ........................
Wireless LAN ............
72
All the settings specified in SB-110 are returned to the default
state.
The items in the [Wireless LAN Settings] screen and [Detail
Settings] screen are returned to the default state.