2-4.Before Connecting Existing Lan - Icom SB-110 Instruction Manual

PDF取説-E_1 02.1.23 10:28 ページ13
2
INSTALLATION AND CONNECTION
2-4 Before Connecting Existing LAN
When you connect SB-110 to an existing LAN, you need to assign the IP address to SB-
110 according to the IP address assignment system specified in the LAN in advance.
* To change the IP address of SB-110, refer to "How to Change IP Address" ( see 4-5).
[Connection to environment that fixed IP address is assigned]
Assign an available IP address to SB-110.
[Connection to environment that the DHCP server function is used]
Change the SB-110 setting to disable the DHCP server function and assign an IP address
which is not assigned automatically.
■ Checking Network Status
When a network is built on an existing LAN, please note the points below:
[IP address of each PC on LAN]
For TCP/IP, if an IP address of a network device (e.g., PC) on the network is the same as
that of SB-110, any communication cannot be made between SB-110 and such network
device. Moreover, the entire network may be affected.
If any network device on an existing network has the IP address [192.168.0.1], you need to
change the default IP address of SB-110 ( see 4-5) before connecting SB-110 to such
existing network.
When you assign an IP address to network devices statically, take care not to assign the
2
same IP address to those network devices. Even when you assign the IP address dy-
namically, you need to change the setting so that the IP addresses assigned by the DHCP
server function are different from the IP address of SB-110. Please note that the broadcast
address cannot be assigned to any device on the network.
■ Setting IP Address
When the IP address of any other network which you want to connect is the same as that
of SB-110, change the IP address into one specified in the LAN.
* For how to set it, refer to "How to Change IP Address" ( see 4-5).
■ Connecting to Existing LAN
Connect to the LAN referring to "How to Connect" ( see 2-3).
13