Table of Contents
Advertisement
PDF取説-E_1 02.1.23 10:28 ページ69
6-4 Writing Saved Settings
This section describes the procedure to write the details of a saved configuration file (
see 6-3) into the SB-110 setting screen.
<How to write>
1. Move a cursor from a PC connected to SB-110 to a saved configuration
file with the extension ".htm" and double-click it.
¡The [Save] screen is shown.
2. Check the IP address of SB-110 in the text box.
If the displayed IP address is different from the set SB-110 IP address, change the SB-
110 IP address in the configuration file according to the SB-110 IP address set cur-
rently. Do not change any other items.
3. Click [Register].
2.
Click
1.
Check
4. When you click [Register], the details of the configuration file are written into SB-110.
* If you set anything after you write the details of the configuration file, close the screen
once. Otherwise, an error may occur. Be sure to start the WWW browser again when
you access the setting screen.
[R Remarks]
Do not write any configuration file created by SB-110 into any products of the same type nor
any products other than SB-110.
MAINTENANCE
6
6
69
Advertisement
Chapters
Table of Contents
