1-5.Using Roaming Function; Using Roaming Function - Icom SB-110 Instruction Manual

PDF取説-E_1 02.1.23 10:28 ページ5

1-5 Using Roaming Function

If SB-110 is located at several places on Ethernet LAN so that the radio
transmission areas can overlap each other, the wireless terminal can transmit
while moving from a radio transmission area to another. Consequently, the radio
transmission area can be extended.
If you use the roaming function, you need to change the default setting ( see 4-3) into
the Access Point mode using a PC connected to SB-110 through a hub on Ethernet
LAN.
* To connect several SB-110s, use a hub.
■ Notes on Use of Roaming Function ( See the next page)
BEFORE INSTALLATION
Radio Transmission Area
SB-110 is switched SB-110 is switched
from one to another from one to another
as the wireless as the wireless
terminal moves. terminal moves.
Move
Wireless LAN card
Ethernet LAN
Move
1
1
5