4-3.Changing Wireless Communication Mode - Icom SB-110 Instruction Manual

PDF取説-E_1 02.1.23 10:28 ページ36
4
SETTING SB-110
4-3 Changing Wireless Communication Mode
When you use SB-110 as an wireless access point, change the setting according to the
procedure below.
【RRemarks】
Wireless communication to Macintosh is unavailable.
Before making the wireless connection, turn on SB-110.
<How to change>
1. Access the SB-110 setting screen according to the procedure described in 4-1 and 4-2.
¡The [Wireless LAN Settings] screen is shown.
2. Operate as follows:
The default value of any other items should not be changed.
* ESS ID of SB-110 is set to "LG" (upper case, falf size) as a default value. Check
ESS ID of your wireless LAN card before connecting SB-110.
2.
Click
1.
Click
3. SB-110 restarts and operates in the Access Point mode.
4. Prepare a PC to which you want to mount our wireless LAN card.
5. This PC must be configured according to the
description of "Connecting through Wireless Ac-
cess Point" ( see 3-2). When you start the
PC, the IP address is obtained from SB-110 au-
tomatically.
¡The [
red.
6. Specify "http://192.168.0.1" (default setting). This is URL of SB-110.
¡The [Wireless LAN Settings] screen is shown.
【 Wireless Access Point Mode】
If you change the SB-110 setting so that the Routing mode ( see 5-3)is enabled in ad-
vance, URL to show the setting screen of SB-110 which operates in the Wireless Ac-
cess Point mode is as follows:
¡Wired terminal: http://192.168.0.1 (default setting)
¡Wireless terminal: http://192.168.1.1 (default setting)
36
] indicator of SB-110 turns on in
Wireless Communication
LAN Card
Wireless terminal SB-110