Specifications For Ethernet Plug - Icom SB-110 Instruction Manual

PDF取説-E_1 02.1.23 10:28 ページ86
7
FOR YOUR REFERENCE
7-5 Rating (continued from the previous page)
■ Wired Section
¡LAN interface:
¡Transmission rate:
¡Routing method:
¡User interface:
■ Antenna Section (for built-in type)
¡Antenna type:
¡Antenna gain:
¡Directional Characteristics of Antenna:
¡Impedance:
¡Standing wave ratio:
* The rating, specifications, appearance, etc are all subject to change without
notice.
* The transmission distance varies depending on the communication speed and
environment.

7-6 Specifications for Ethernet Plug

86
Ethernet plug (Type RJ-45)
* Based on IEEE802.3/10BASE-T
* Based on IEEE802.3u/100BASE-TX
10/100 Mbps (switched automatically/half-duplex)
Static/Dynamic (RIP)
Status indicator (PWR <Green>, MODE <Green>,
LAN <Red>, <Red>), [MODE] button.
Pattern antenna
5.5 dpi
Horizontal: ±30° (attenuation 3 dB)
Vertical: ±30° (attenuation 3 dB)
50Ω
1.6 or less
Modular plug type RJ-45
1. Sending (+)
3. Receiving (+)
5. Not used
7. Not used
2. Sending (-)
4. Not used
6. Receiving (-)
8. Not used