Softkey Layout Configuration - Yealink T5 Series Administrator's Manual

4. Save the change and place this file to the provisioning server.

Softkey Layout Configuration

The following table lists the parameters you can use to configure the softkey layout.
Parameter phone_setting.custom_softkey_enable
It enables or disables the custom soft keys layout feature.
Description
Note: It is not applicable to CP960 phones.
Permitted 0-Disabled
Values 1-Enabled
Default 0
Web UI Settings->Softkey Layout->Custom SoftKey
Parameter custom_softkey_call_failed.url
It configures the access URL of the custom softkey layout file in the CallFailed state.
Description
Note: It works only if "phone_setting.custom_softkey_enable" is set to 1 (Enabled). It is not applicable to
CP960 phones.
Permitted
URL within 511 characters
Values
Default Blank
Parameter custom_softkey_call_in.url
It configures the access URL of the custom softkey layout file in the CallIn state.
Description
Note: It works only if "phone_setting.custom_softkey_enable" is set to 1 (Enabled). It is not applicable to
CP960 phones.
Permitted
URL within 511 characters
Values
Default Blank
Parameter custom_softkey_connecting.url
Description It configures the access URL of the custom softkey layout file in the Connecting state.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
113