Yealink T5 Series Administrator's Manual page 239

account.X.auto_answer_mute_enable
Parameter
(X is equal to 1)
It enables or disables the auto answer mute feature.
Description
Note: It is only applicable to CP960 phones. It works only if the values of parameters "account.X.auto_
answer" and "features.allow_mute" are set to 1 (Enabled).
0-Disabled
Permitted
1-Enabled, the phone will mute the microphone when an incoming call is automatically answered, and
Values
then the other party cannot hear you.
Default 0
Web UI Account->Basic->Auto Answer Mute
Phone UI Settings->Features->Auto Answer->Account 1-> Auto Answer (On) ->Auto Answer Mute
Parameter features.ip_call.auto_answer.enable
It enables or disables the auto answer feature for IP call.
Note: It works only if "features.direct_ip_call_enable" is set to 1 (Enabled). The phone cannot auto-
Description
matically answer the incoming IP call when the IP phone is in a call or dialing even if IP call auto answer is
enabled.
0-Disabled
Permitted
Values
1-Enabled, the phone can automatically answer the IP call.
Default 0
Web UI Features->General Information->IP Direct Auto Answer
Parameter features.auto_answer_delay
It configures the delay time (in seconds) before the phone automatically answers an incoming call.
Description
Note: For the call coming from a SIP account, it works only if "account.X.auto_answer" is set to 1
(Enabled).
Permitted
Integer from 1 to 4
Values
Default 1
Web UI Features->General Information->Auto Answer Delay
Parameter features.auto_answer_tone.enable
It enables or disables the phone to play a warning tone when an incoming call is automatically answered.
Description
Note: For the call coming from a SIP account, it works only if "account.X.auto_answer" is set to 1
(Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 1
Web UI Features->General Information->Enable Auto Answer Tone
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
<MAC>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
233