Key As Send; Key As Send Configuration; Softkey Layout - Yealink T5 Series Administrator's Manual

Parameter features.caller_name_type_on_dialing
It configures the selected account information displayed on the pre-dialing or dialing screen.
Description
Note: It works only if "features.station_name.value" is left blank. It is not applicable to CP960 phones.
1-Label, configured by the parameter "account.X.label".
Permitted
2-Display Name, configured by the parameter "account.X.display_name".
Values
3-User Name, configured by the parameter "account.X.user_name".
Default 3
Web UI Features->General Information->Display Method on Dialing

Key As Send

Key as send allows you to assign the pound key ("#") or asterisk key ("*") as the send key.
Topic

Key As Send Configuration

Key As Send Configuration
The following table lists the parameters you can use to configure key as send.
Parameter features.key_as_send
It configures the "#" or "*" key as the send key.
Description
Note: It is not applicable to CP960 phones.
0-Disabled, neither "#" nor "*" can be used as the send key.
Permitted
1-# key
Values
2-* key
Default 1
Web UI Features->General Information->Key As Send
Phone UI Settings->Features->Key As Send->Key As Send
Parameter features.send_pound_key
It configures the behavior when the user presses the # key twice on the dialing screen.
Description
Note: It works only if "features.key_as_send" is set to 1 (Enabled). It is not applicable to CP960 phones.
0-The phone will dial out "#".
Permitted
Values
1-The phone will not dial out "#". After the user presses the # key again, the phone will dial out "##".
Default 0
Web UI Features->General Information->Send Pound Key

Softkey Layout

Softkey layout is used to customize the soft keys at the bottom of the phone screen for best meet users' requirements.
In addition to specifying which soft keys to display, you can determine their display order. The configurations for
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
109