Handset Wallpaper Configuration; Handset Screen Saver; Handset Screen Saver Configuration - Yealink T5 Series Administrator's Manual

It is only applicable to W56H handsets.
Topic

Handset Wallpaper Configuration

Handset Wallpaper Configuration
The following table lists the parameter you can use to configure the handset wallpaper.
Parameter custom.handset.wallpaper
It configures the wallpaper displayed on the handset LCD screen.
Description
Note: It will take effect on all handsets that are registered on the same phone. It works only if "stat-
ic.auto_provision.handset_configured.enable" is set to 1 (Enabled).
1-Wallpaper1
2-Wallpaper2
Permitted
3-Wallpaper3
Values
4-Wallpaper4
5-Wallpaper5
Default -1, do not change the wallpaper set on each handset.
Handset UI OK->Settings->Display->Wallpaper

Handset Screen Saver

The screen saver of the handset is designed to protect your LCD screen. You can enable the screen saver to protect the
LCD screen, an analog clock will be activated and appear on the LCD screen after the handset is idle for approximately
10 seconds.
It is not applicable to DD phones.
Topic

Handset Screen Saver Configuration

Handset Screen Saver Configuration
The following table lists the parameter you can use to configure the handset screen saver.
Parameter custom.handset.screen_saver.enable
It enables or disables screen saver feature.
Description
Note: It will take effect on all handsets that are registered on the same phone. It works only if "stat-
ic.auto_provision.handset_configured.enable" is set to 1 (Enabled).
0-Disabled
Permitted
1-Enabled, an analog clock will be activated and appear on the LCD screen if no user activity is sensed for
Values
approximately 10 seconds.
Default 1
Handset UI OK->Settings->Display->Screen Saver
Using Handsets with T58V/T58A/T56A Phones
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
385