User-Triggered Provisioning Settings Configuration - Yealink T5 Series Administrator's Manual

If it is set to a specific value less than starting time configured by the parameter "static.auto_pro-
vision.weekly.begin_time", the phone performs auto provisioning at random between the starting time on
that day and ending time in the next day.
Note: It works only if "static.auto_provision.flexible.enable" is set to 1 (On).
Permitted
Time from 00:00 to 23:59
Values
Default Blank
Web UI Settings->Auto Provision->Flexible Time
Parameter static.auto_provision.prompt.enable
It enables or disables the phone to prompt you for the configuration update and the result (if any con-
figuration changes) during auto provisioning.
Description
Note: If the phone performs auto provisioning when receiving a SIP NOTIFY message which contains the
header "Event: check-sync", the phone will display the prompt message no matter whether the con-
figuration is updated.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Parameter static.auto_provision.connect.keep_alive
Description It enables or disables the long connection for downloading files via auto provisioning.
Permitted 0-Disabled, the phone uses the short connection for downloading files via auto provisioning
Values 1-Enabled
Default 0
Parameter custom.auto_provision.save_rps_info.enable
It enables or disables the phone to save the entered user name and password when performing RPS (Redir-
Description
ection and provisioning server) update for auto provisioning.
Permitted
0-Disabled
1-Enabled
Values
Default 1
Parameter static.auto_provision.authentication.expired_time
It configures the timeout (in seconds) after which the authentication pop-up box for auto provisioning
Description
disappears.
0-The authentication pop-up box does not disappear from the phone screen automatically.
Permitted
Integer from 10 to 86400 -The authentication pop-up box automatically disappears from the phone
Values
screen after the designated time.
Default 7200
[1]
If you change this parameter, the phone will reboot to make the change take effect.

User-Triggered Provisioning Settings Configuration

You can enable the users to trigger phones to perform provisioning by dialing an activation code. This method works
only if there is no registered account on the phone.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Provisioning
69