Multicast Listening Group Configuration - Yealink T5 Series Administrator's Manual

Default Blank
Web UI Directory->Multicast IP->Paging List->Paging Address
Phone UI Settings->Features->Paging List->Option->Edit->Address
Parameter multicast.paging_address.X.label
It configures the name of the multicast paging group to be displayed in the paging list. It will be dis-
Description
played on the phone screen when placing the multicast paging calls.
Permitted
String
Values
Default Blank
Web UI Directory->Multicast IP->Paging List->Label
Phone UI Settings->Features->Paging List->Option->Edit->Label
Parameter multicast.paging_address.X.channel
Description It configures the channel of the multicast paging group in the paging list.
0-all the Yealink phones running firmware version 80 or earlier or Yealink phones listen to channel 0 or
third-party available devices (for example, Cisco phones) in the paging group can receive the RTP stream.
Permitted
1 to 25-the Polycom or Yealink phones preconfigured to listen to the channel can receive the RTP
Values
stream.
26 to 30-the Yealink phones preconfigured to listen to the channel can receive the RTP stream.
Default 0
Web UI Directory->Multicast IP->Paging List->Paging Address->Channel
Phone UI Settings->Features->Paging List->Option->Edit->Channel
[1]
X ranges from 1 to 31

Multicast Listening Group Configuration

Yealink phones support up to 31 groups for listening. You can assign multicast IP address with a channel for each
group, and specify a label to each group to identify the phones in the group, such as All, Sales, or HR.
The following table lists the parameters you can use to configure the multicast listening group.
Parameter multicast.listen_address.X.ip_address
It configures the multicast address and port number that the phone listens to.
Description
Note: The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Permitted
IP address: port
Values
Default Blank
Web UI Directory->Multicast IP->Multicast Listening->Listening Address
Parameter multicast.listen_address.X.label
Description It configures the label to be displayed on the phone screen when receiving the multicast paging calls.
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
Call Features
261