Tr-069 Configuration - Yealink T5 Series Administrator's Manual

Administrator's Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
RPC Method
l
l
This method is used to request the CPE to schedule a one-time Inform method call (separate
ScheduleInform
from its periodic Inform method calls) sometime in the future.
FactoryReset This method resets the CPE to its factory default state.
This method informs the ACS of the completion (either successful or unsuccessful) of a file
TransferComplete
transfer initiated by an earlier Download or Upload method call.
AddObject This method is used to add a new instance of an object defined on the CPE.
DeleteObject This method is used to remove a particular instance of an object.

TR-069 Configuration

The following table lists the parameters you can use to configure TR-069.
Parameter static.managementserver.enable
Description It enables or disables the TR-069 feature.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Web UI Settings->TR069->Enable TR069
Parameter static.managementserver.username
It configures the TR-069 ACS server user name used to authenticate the phone.
Description
Leave it blank if no authentication is required.
Permitted
String within 128 characters
Values
Default Blank
Web UI Settings->TR069->ACS Username
Parameter static.managementserver.password
It configures the TR-069 ACS server password used to authenticate the phone.
Description
Leave it blank if no authentication is required.
Permitted
String within 64 characters
Values
Default Blank
Web UI Settings->TR069->ACS Password
Parameter static.managementserver.url
It configures the access URL of the TR-069 ACS server.
Description
Note: The phones also support obtaining the URL of the ACS by detecting DHCP option 43.
Permitted
URL within 511 characters
Values
50
Configuration File
Log File
Description
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg