Choosing The Desired Display Setup - Barco XDL-4K30 User Manual

GUI – Installation
Source
Active Stereo
(sequential L/R)
Active Stereo
(sequential L/R)
Active Stereo
(sequential L/R)
Passive Stereo
(separate L/R)
Passive Stereo (dual
pipe L/R)

8.8.4 Choosing the desired Display Setup

Output modes
The following output modes are available:
• AutoStereo: Automatic mode (2D input = 2D output, 3D input = Active Stereo output).
• Mono: Forces all source signals to 2D output.
• ActiveStereo: Forces all source signals to Active Stereoscopic 3D.
Use the following table as an indicator of what display mode you require.
Source signal
2D Source
Active Stereo source
Passive Stereo source
When a different Display Mode is chosen compared to the source signal (e.g. Active Stereo source
with Mono output), advanced image processing will make sure you a desirable image will be
displayed.
How to select the desired projection method?
1. In the main menu, select Installation → Display Setup.
Image 8-64: Installation menu, Display setup
The Display setup menu is displayed.
2. Select the desired Display Mode:
• AutoStereo (default value)
• Mono
• ActiveStero
100 R5906151 /02 XDL
Video Timing /
Layout mode
cable
Standard layout (1x1 2560 x 1600 @120
layout) Hz
4 Column mode (4x1 960 x 2160 @120 Hz
layout)
4 Quadrant mode 1920 x 1080 @120
(2x2 layout) Hz
Standard layout (1x1 3840 x 2160 @60 Hz
layout)
2 Column mode (2x1 1920 x 2160 @60 Hz
layout)
AutoStereo
Output is a 2D image
Output is in Active Stereo Output is a 2D image
Output is in Active Stereo Output is a 2D image
Fixed
configuration?
• Cable 1: left eye
• Cable 2: right eye
• Cable 1: left eye,
left column
• Cable 2: left eye,
right column
• Cable 3: right
eye, left column
• Cable 4: right
eye, right column
Mono
Output is a 2D image
Color depth
30 bpp
30 bpp
30 bpp
30 bpp
30 bpp
ActiveStereo
Output is in Active Stereo
Output is in Active Stereo
Output is in Active Stereo