Choosing The Desired Display Setup - Barco UDX Series User Manual

GUI – Installation

8.12.4 Choosing the desired Display Setup

Output modes
The following output modes are available:
• AutoStereo: Automatic mode (2D input = 2D output, 3D input = Active Stereo output).
• Mono: Forces all source signals to 2D output.
• ActiveStereo: Forces all source signals to Active Stereoscopic 3D.
Use the following table as an indicator of what display mode you require.
Source signal
2D Source
Active Stereo source
Passive Stereo source
When a different Display Mode is chosen compared to the source signal (e.g. Active Stereo source
with Mono output), advanced image processing will make sure you a desirable image will be
displayed.
How to select the desired projection method?
1. In the main menu, select Installation → Display Setup.
Image 8-72: Installation menu, Display setup
The Display setup menu is displayed.
Image 8-73: Display setup menu
2. Select the desired Display Mode:
• AutoStereo (default value)
• Mono
• ActiveStero
144 R5906112 /09 UDX series
AutoStereo
Output is a 2D image
Output is in Active Stereo Output is a 2D image
Output is in Active Stereo Output is a 2D image
Mono
Output is a 2D image
ActiveStereo
Output is in Active Stereo
Output is in Active Stereo
Output is in Active Stereo