Table of Contents
Advertisement
GUI – System Settings
DMX Feature What can be done?
DMX Monitor
If a DMX device is connected, the settings per channel can be displayed via the Monitor
button.
Art-Net DMX
DMX can be sent via the Ethernet connector to the projector instead of the classic DMX
connector. This function can be enabled or disabled. Art-Net is generally used when more
than 512 addresses are used in your setup.
DMX
Note: DMX Universe can only be used when Art-Net DMX is enabled.
Universe
If Art-Net is enabled, you can specify which DMX universe this projector belongs to.
DMX Power
The projector can be forced to shut down after a certain time-out period (in minutes) if no
Down
DMX signals are available.
How to set up DMX?
1.
In the main menu, select System Settings → Communication → DMX.
Image 9-14: Communication menu, DMX
The DMX menu is displayed.
Image 9-15: DMX menu
2.
Choose the desired DMX mode.
3.
Choose the desired starting channel.
4.
Choose whether or not you want the Auto power-down feature to be enabled. If enabled, determine the time-
out.
5.
If required, enable Art-Net. If enabled, determine the desired Art-Net Universe and Art-Net channel.
9.5 GSM configuration
Only possible when a GSM module with SIM card is installed in the projector.
110
R5906151 /02
XDL
Advertisement
Table of Contents
