Table of Contents
Advertisement
When enabled, the slider becomes blue; when disabled, the slider is gray.
9.8 Controlling the backlight of the LCD Display
What lighting can be controlled?
You can choose how quickly the backlight of the LCD turns off. You can select one of the default values, or
enter a custom value.
Alternatively, you can turn on Stealth Mode instead. By activating this mode, both the backlight of the LCD as
well as the backlight of all the buttons of the keypad will be permanently disabled.
How to control
1.
In the main menu, System Settings → Backlight.
Image 9-21: System settings, Backlight
The Backlight menu will be displayed.
Image 9-22: Backlight menu
2.
Choose the desired setting for the backlights. Select one of the predetermined options, or a custom value.
9.9 Reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
UserInterface
Network
System
Setting
Theme
Communication
Eco Mode (if applicable)
GUI – System Settings
Default value
Light
LAN, Automatic settings
Available
R5906151 /02
XDL
113
Advertisement
Table of Contents
