Table of Contents
Advertisement
Image 6-7: Select source
4.
Select the desired connector.
The Connector Settings menu for this connector will be displayed.
Image 6-8: Example of connector settings for an HDMI connector
5.
You can change the following:
•
To force a limit on the color space, select one of the available color spaces.
•
To force a limit on the used signal range, select one of the available signal ranges.
•
To set a video timing other than the one native for the connector, select one of the options under EDID.
Note: You cannot change the EDID for SDI connectors.
GUI – Source
R5906151 /02
XDL
61
Advertisement
Table of Contents
