Table of Contents
Advertisement
Image 8-37
2.
Identify the projector with the longest delay.
3.
For each projector in the setup, select Installation → Warp in the main menu.
Image 8-38: Installation menu, Warp
4.
In the Warp menu, select Transport Delay.
Image 8-39: Warp menu, Transport delay
The Transport menu is displayed.
Image 8-40
5.
Enter the value either by the arrow keys (one step at a time) or directly by the numeric keys on the remote
control.
6.
Enter "Apply" to confirm the value.
GUI – Installation
R5906151 /02
XDL
87
Advertisement
Table of Contents
