Table of Contents
Advertisement
GUI – Installation
Image 8-12: Warp Menu, Screen Size
The Screen Size menu is displayed.
Image 8-13: Screen size
2.
Select either Screen width or Screen height.
3.
Set the new value to shrink either the width or height of the warp outline so that the outline is equal with the
active source.
Tip: A red border will be projected along with the current image. The border is a visual tool, showing
the result of the adjusted outline.
Tip: The value can also be entered by the numeric keys on the remote control. Press * to delete
existing numbers, and enter the new value by the numeric keys.
4.
Click Apply.
8.4.4 Warping – 4 corners adjustment
About 4 Corners adjustment
4 corner adjustment is typically used when the mechanical installation of the projector prevents it from pointing
perpendicularly at the screen. For example, you can overshoot the screen and use 4 corner adjustment to pull
your projected image corners back into the screen.
Some examples:
78
R5906151 /02
XDL
Advertisement
Table of Contents
