3.
Power on the projector completely.
4.
Select the correct stitched source Input in the Source menu. See "Displaying multiple sources: Stitched
layouts", page 56.
5.
Select the desired Display format. For more info, see "Choosing the desired Display Setup", page 95.
6.
Depending on the chosen 3D emitter, correct the 3D setup. For more info, see "3D emitter Setup", page 96.
8.8.3 Connection possibilities
At this moment, the only inputs supporting 3D on the Pulse input boards are the DisplayPort inputs
and HDMI input. More inputs may support 3D in a future release.
Connecting with the quad combo input card
There is only one way of projecting Active stereoscopic 3D with the Combo input card, using the following
setup:
•
Source: Active Stereo (sequential L/R)
•
Layout mode: Standard layout (1x1 layout)
•
Video Timing: 2560 x 1600 (WQXGA) @120 Hz
•
Color depth: 30 bpp
•
Connector: DisplayPort 1.2 or HDMI
Connecting with the quad DP 1.2 Input card
You can use one of the following methods. The resulting image will always be an Active Stereo image.
Source
Active Stereo
(sequential L/R)
Active Stereo
(sequential L/R)
Active Stereo
(sequential L/R)
Passive Stereo
(separate L/R)
Passive Stereo (dual
pipe L/R)
8.8.4 Choosing the desired Display Setup
Output modes
The following output modes are available:
•
AutoStereo: Automatic mode (2D input = 2D output, 3D input = Active Stereo output).
•
Mono: Forces all source signals to 2D output.
•
ActiveStereo: Forces all source signals to Active Stereoscopic 3D.
Use the following table as an indicator of what display mode you require.
Video Timing /
Layout mode
cable
Standard layout (1x1
2560 x 1600 @120
layout)
Hz
4 Column mode (4x1
960 x 2160 @120 Hz
layout)
4 Quadrant mode
1920 x 1080 @120
(2x2 layout)
Hz
Standard layout (1x1
3840 x 2160 @60 Hz
layout)
2 Column mode (2x1
1920 x 2160 @60 Hz
layout)
GUI – Installation
Fixed
Color depth
configuration?
30 bpp
30 bpp
30 bpp
•
Cable 1: left eye
30 bpp
•
Cable 2: right eye
•
Cable 1: left eye,
30 bpp
left column
•
Cable 2: left eye,
right column
•
Cable 3: right
eye, left column
•
Cable 4: right
eye, right column
R5906112-06
UDX series
95