Image 8-26
There are now two vectors on each side of the picture that can be adjusted individually.
2.
Select the desired slider and confirm.
Image 8-27: Right vector of the upper side of the picture.
3.
Adjust angle and linearity (length) individually to obtain the correct correction and confirm.
Tip: Adjust the angle by using the up and down arrow keys. Adjust the linearity by using the left and
right arrow keys.
Image 8-28
4.
Repeat the step for each side of the picture that must be corrected.
GUI – Installation
R5906151 /02
XDL
83