Table of Contents
Advertisement
GUI – Installation
Image 8-18
4.
To set warping on one of the four corners, select one of the four corners and confirm.
5.
Set the desired X and Y coordinates for this corner, using the arrow keys, and confirm.
Image 8-19
Tip: A red border corner will be projected along with the current image. The border is a visual aid,
showing the result of the warped corners.
6.
Repeat from for each corner, until all corners are warped in the desired position.
To reset the 4 corner adjustments, select Reset and press the OK button.
8.4.5 Warping – Bow
About bow adjustment
A bow distortion can be adjusted so that a normal image is displayed. Positive adjustments introduce more
outside bow distortion. Negative adjustments introduce more inside bow distortion.
80
R5906151 /02
XDL
Advertisement
Table of Contents
