Table of Contents
Advertisement
GUI – System Settings
Image 9-26: Lens Calibration menu
2.
In the Lens Calibration menu, select the desired calibration action and click OK.
You can select one of the following functions:
•
Horizontal shift
•
Vertical shift
•
Focus
•
Zoom
The text Calibration in progress will be displayed next to selected function until the calibration is completed.
When an error is detected, the message Calibration Error is displayed next to function.
9.11 Electronic Convergence
What can be done?
The convergence patterns can be used to check the convergence alignment of red, green and blue. If there is
a misalignment of at least one 1 pixel, an electronic realignment is possible.
Mechanical realignment of the convergence can only be done by a qualified service technician.
How to display the convergence settings
1.
In the main menu, navigate to System Settings → Maintenance → Electronic Convergence.
Image 9-27: Maintenance menu, Electronic Convergence
The Electronic Convergence menu is displayed.
116
R5906151 /02
XDL
Advertisement
Table of Contents
