Table of Contents
Advertisement
Image 9-33: Advanced Settings Menu, Color
The Color menu will be displayed.
Image 9-34: Color menu
3.
Select the desired value to change and confirm.
4.
Change the values to the desired position, taking into account the color gamut values.
5.
Select APPLY and click OK.
9.12.2 Advanced Settings – Dual Eye Real Color correction
Why dual eye Real Color correction
When using the XDL in 6P 3D mode, it is possible to do color correction on the colors for both eyes separately.
While the native colors have been measured and set during factory production, it may be necessary to change
these after changes (or service actions) on the optical path.
If you need to change these settings, make sure to also perform a P7 calibration, using the Projector Toolset
and a chroma meter. For more info on this topic, refer to the Projector Toolset User Guide.
How to adjust the P7 Dual Eye Color
1.
In the main menu, navigate to System Settings → Maintenance → Advanced Settings.
Image 9-35: Maintenance menu, Advanced Settings
2.
In the Advanced Settings menu, select Color.
GUI – System Settings
R5906151 /02
XDL
119
Advertisement
Table of Contents
