Table of Contents
Advertisement
Image 9-12
2.
In the Hostname menu, press confirm to edit the Hostname field.
3.
Use the digital keyboard to change the Hostname to the desired custom name.
Image 9-13
4.
Click OK to confirm the typed name and Click Apply to update the name.
9.4 DMX
About the ways to control the projector via DMX
DMX signals can be connected to the DMX In port on the communicator interface when using a standard DMX
cable equipped with XLR connector. The DMX out can be used to create a chain of DMX devices. One
universe can control up to 512 channels.
If you are using a DMX console and other automated lighting products compatible with Art-Net, the Ethernet
network can serve as the link for DMX control. All DMX controls can be sent over the Ethernet cable. Multiple
universes are possible.
About the DMX menu
DMX Feature What can be done?
DMX Address Before a projector can execute DMX commands, a unique address (named DMX address)
should be given to the projector.
This address can vary from 1 to 512.
DMX Mode
Two different modes for DMX are available.
•
Basic: A basic configuration where 2 channels are implemented.
•
Extended: A full configuration, spread over 14 channels.
For the full mapping of each used channel, refer to the DMX chart in the appendices. See
"DMX chart", page 153.
GUI – System Settings
R5906151 /02
XDL
109
Advertisement
Table of Contents
