Table of Contents
Advertisement
Using the Basic Black Level menu, you can already specify the area of the mask and its contents. But by using
the RGB Adjustment page, you can specify the multiplication factors (gains) for the Red, Green and Blue
colors separately.
How to perform an RGB adjustment
1.
In the main menu, select Installation → Blend and Mask → Black Level → RGB Adjustment.
Image 8-57: Black Level menu, RGB Adjustment
The RGB Adjustment menu is displayed.
Image 8-58: RGB Adjustment menu
2.
Select wether or not you want to link the Red, Green and Blue colors together. Enable Link RGB to do so.
Enabling Link RGB will allow you to adjust the gain of the three colors together.
Image 8-59
3.
Select one of the three sliders.
4.
Use the left and right arrow keys to modify the gain of the chosen color.
GUI – Installation
R5906151 /02
XDL
95
Advertisement
Table of Contents
