Table of Contents
Advertisement
Image 7-10: Advanced menu – Gamma
2.
Use the ◄ or ► key to change the gamma value between 1.0 and 2.8 . The default value is 2,2.
Tip: The slider can be adjusted with a precision of 0.1.
Image 7-11: Gamma slider
3.
If necessary, use the ▲ or ▼ key to select the other image adjustment options.
7.4 P7 Realcolor
Purpose
When blending images from multiple projectors, the perceived color coordinates of each projector can be
altered to a desired common level, so that the projected colors are identical over all projectors used.
Alternatively, if you are unfamiliar with how adjusting the Colors to a specific setting, there are also a certain
number of presets available, which forces the color output to specific color standards.
The selection of the presets will vary, depending on the projector type and on the peripherals installed.
How to set custom P7 values
1.
In the main menu, select Image → Advanced → P7 Realcolor.
Image 7-12: Advanced menu — P7 Realcolor
The P7 menu is displayed.
GUI – Image
R5906151 /02
XDL
67
Advertisement
Table of Contents
