2.
Use the ▲ or ▼ key to shift the lens (image) in vertical direction.
Use the ◄ or ► key to shift the lens (image) in horizontal direction.
Image 8-4: Shift adjustment
3.
You can force the lens back to the center position by selecting Mid Position and confirming.
Note: When chosen, the lens will calibrate itself and then return to the middle position.
8.3 Orientation
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
•
front/table
•
front/ceiling
•
rear/table
•
rear/ceiling
How to set the correct orientation
1.
In the main menu, select Installation → Orientation.
Image 8-5: Installation menu, Orientation
The Orientation menu is displayed.
GUI – Installation
R5906151 /02
XDL
75