Barco XDL-4K30 User Manual page 37

2 Column mode (2x1
layout)
Native video timings •
CAUTION: In order to display high resolution images (e.g.: 3840 x 2160 @60 Hz) via the DP1.2
input, the quality of the cable must be adequate, in addition the length of the cable can also
influence the performance. In case there is an issue with one of these criteria the automatic link-
training initiated by the DP-standard may decide to switch to a lower resolution.
Input specifications – DisplayPort 1.2 input
Pixel rate Up to 600 MHz pixel clock
Color space •
•
•
Color depth •
•
•
Data rate support •
•
•
HDCP support HDCP 1.4
For future release •
Audio not supported
3D support •
•
Video timings 2D / 3D
progressive 1
2D
Active
3D
Native video •
timings
• 1920 x 2160 @50 Hz
• 1920 x 2160 @60 Hz
• 2048 x 2160 @50 Hz
• 2048 x 2400 @60 Hz
3840 x 2160 @60 Hz
YCbCr 4:2:2
YCbCr 4:4:4
RGB 4:4:4
24 bpp
30 bpp
36 bpp
1.62 Gbps: Reduced Bit Rate (RBR)
2.7 Gbps: High Bit Rate (HBR)
5.4 Gbps: High Bit Rate 2 (HBR2)
Interlaced support
Field sequential 3D (Active 3D)
Passive 3D not supported on this board.
Layout Mode
Standard layout (1x1
layout)
Standard layout (1x1
layout)
3840 x 2400 @60 Hz
Input & Communication
Supported formats
• Up to 4096 x 2160 @24 Hz
• Up to 4096 x 2160 @30 Hz
• Up to 2048 x 1080 @48 Hz
• Up to 4096 x 2160 @50 Hz
• Up to 4096 x 2160 @60 Hz
• Up to 2560 x 1600 @120 Hz
• 1600 x 1200 @120 Hz
• 2560 x 1080 @120 Hz
• 2560 x 1600 @120 Hz
R5906151 /02 XDL 37