Table of Contents
Advertisement
Image 4-10: Update Pulse projector
or
click on the path selection icon (2) to open a browser window.
7.
Browse to the desired update package (format .fw) and click Select Update Package.
The path will be filled out in the input field next to Update File.
8.
Click Update (3).
The update starts. This action can take a long time. A message is displayed.
9.
Click Yes to continue (4).
The update file will be transferred to the projector and installed. The projector will reboot.
A message is displayed. Click Ok to clear the message.
How to update the software if the projector isn't connected to the network
1.
Power on the projector. Wait until the Power on/off button is either lit white or blue.
2.
Download the latest firmware file ( format .fw) from Barco's website. The firmware can be downloaded for free
from Barco's website, (URL: http://www.barco.com). Click on myBarco and log in to get access to secured
information. Registration is necessary.
If you are not yet registered, click on New to myBarco and follow the instructions. With the created login and
password, it is possible to log in where you can download the software.
3.
Place the firmware file on a clean USB flash drive.
Note: Make sure the flash drive is FAT32 compatible & no other files are on the flash drive.
4.
Plug the flash drive in the USB port on the Communication Panel.
Getting Started
R5906151 /02
XDL
51
Advertisement
Table of Contents
