Epson G3 Series Manual page 46

Setup & Operation 3. Environments and Installation
RC700-A
83
Do not remove the M/C cables from the Manipulator.
NOTE For environmental conditions regarding space when placing the Controller on the base

table, refer to the Controller manual.
■ To ensure safety, a safeguard must be installed for the robot system.
For details on the safeguard, refer to the EPSON RC+ User's Guide.
WARNING
34
82
35
54
Power Cable
Connector (Straight)
76
35
Power Cable
Connector (L-shaped)
44
11
49
Signal Cable
Connector
G3 Rev.14