N5280A
Front and Rear Panel Features
Front and Rear Panel Features
Figure 5
Front Panel N5280A (Option 700 and 001)
Figure 6
Front Panel N8280A (Option 002)
RF INPUTS (A, B, C and D) (all options)
These input signals (10 MHz to 26.5 GHz) will be downconverted and directed
to the IF Outputs.
IF OUTPUTS (A, B, C and D) (Option 002)
These outputs transmit IF signals (10 MHz to 1.5 GHz) derived from the RF
Inputs.
LO INPUT (Option 002)
This input signal (10 MHz to 26.5 GHz) is used as the LO to downconvert the
RF Inputs and to provide a buffered LO Output.
Standby Switch
The switch is only a Standby switch, not a AC line power switch.The main
power cord can be used as the system disconnecting device. It disconnects the
mains circuits from the mains supply.
Keysight N5280A User's and Service Guide
A
A
B
C
RF INPUT Ports
RF INPUT Ports
B
IF OUTPUT Ports
A
B
D
C
D
C
D
LO INPUT
15