N5280A
General Specifications
Power Requirements
Verify that the required ac power is available before installing the Test Set to
the PNA.
— 100/120/220/240 VAC (50/60Hz)
— The instruments can operate with mains supply voltage fluctuations up to ±
— Air conditioning equipment (or other motor–operated equipment) should
—
Table 3
Standard Equipment
Instrument
N5242A
N5264A
N5280A
This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall be
inserted only into a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.
12
10% of the nominal voltage.
not be placed on the same ac line that powers the Test Set and PNA.
Table 3
contains the maximum wattage for all instruments. This table can
be use to determine the electrical and cooling requirements.
Maximum Power Requirements
Max Wattage
450
450
350
Keysight N5280A User's and Service Guide